The short version: R1 is the cheapest Unitree humanoid, from $4,900. G1 costs from $13,500. H1 is a full-size research robot whose shop price of $90,000 carries the note "Contact us for the real price". For R1 and G1, only the EDU version can be programmed by the buyer, and G1 EDU is priced on request.
Unitree sells several humanoid models with a public price, which is rare in our index. The names say little about what each robot is for. This page puts G1, R1 and H1 side by side, using Unitree's own product pages and shop. Every number links to its source. Where Unitree does not state a value, the table says "Not disclosed".
The three robots side by side
| R1 | G1 | H1 | |
|---|---|---|---|
| Lowest listed price | $4,900 (R1 AIR) | $13,500 | $90,000 in shop, "Contact us for the real price" |
| Standing size | 1230 x 357 x 190 mm | 1320 x 450 x 200 mm | About 180 cm tall |
| Weight | About 27 to 29 kg | About 35 kg | About 47 kg |
| Joints | 20 to 26, up to 40 on EDU | 23, up to 43 on EDU | 5 per leg, 4 per arm |
| Battery life | About 1 hour | About 2 hours | Not disclosed |
| Programmable version | R1 EDU | G1 EDU | Ask Unitree |
Sources: Unitree's product pages for R1, G1 and H1. Prices exclude tax and shipping.
Price: what the listed numbers cover
R1. Unitree lists R1 AIR at $4,900 and R1 at $5,900 on the R1 product page. R1 EDU is "Contact Sales" on that page and $10,500 in Unitree's shop.
G1. The G1 product page lists the base G1 at US $13.5K. Unitree's shop shows two G1 options, at $13,500 and $21,500. G1 EDU is priced on request.
H1. The H1 product page shows no price. Unitree's shop lists H1 at $90,000 and puts "Contact us for the real price" in the product name. Treat that figure as a placeholder until Unitree quotes you. No price is published for the heavier H1-2.
All of these prices exclude tax and shipping. The shop adds that customs duties are not included.
Size and strength
R1 and G1 are small. R1 stands 123 cm and G1 132 cm, which is the height of a child. H1 is about 180 cm, the height of an adult.
The arms are weak on the two small robots. G1 carries about 2 kg per arm, and about 3 kg on G1 EDU. Unitree notes that this varies with the arm's posture. Unitree gives no arm load for H1. For the related H1-2 it states about 7 kg rated and about 21 kg peak.
H1 is the fast one. Unitree states 3.3 m/s and calls it a world record. H1-2 is rated below 2 m/s.
Battery
G1 runs for about 2 hours and R1 for about 1 hour, according to Unitree. Both use a quick-release battery. H1 has a 15 Ah (0.864 kWh) battery that can be swapped quickly, but Unitree states no run-time for it.
None of these figures is an independent test. They are what the maker states.
What you can program
This is the detail that most buyers miss. On the base versions you get the robot and its built-in behaviours. Writing your own software for it, which Unitree calls secondary development, needs the EDU version:
- R1: only R1 EDU supports secondary development and an optional dexterous hand.
- G1: only G1 EDU supports secondary development. It also has 23 to 43 joints against 23, and can take three-fingered hands.
If you plan research or your own applications, compare EDU prices, not the headline price.
Warranty
The warranty differs by version. R1 AIR has 6 months, R1 has 8 months and R1 EDU has 12 months. G1 has 8 months and G1 EDU has 18 months.
What about H2?
Unitree also sells H2, a newer full-size humanoid. It is listed at $29,900 before tax and shipping on the H2 product page. H2 is 1820 mm tall, weighs about 70 kg, has 31 joints and runs for about 3 hours. As with the others, only H2 EDU supports secondary development, and it is priced on request.
For a full-size Unitree robot with a firm public price, H2 is therefore the clearer offer than H1.
Which one fits which buyer
- Teaching, demos and a first humanoid: R1 AIR or R1. They are the cheapest, but they run for about an hour and the base versions cannot be programmed.
- Research and development on a small robot: G1 EDU. It has up to 43 joints and an 18-month warranty, the longest of the versions compared here.
- Full-size research: H2 EDU or H1. Ask Unitree for a quote in both cases.
Are any of them at work?
The deployment ledger holds one record for these robots: a teleoperated night-shift pilot with G1 at a Føtex store in Denmark, documented by the integrator. It is confirmed by the vendor side, not by the customer. The ledger has no record for R1, H1 or H2.
Unitree itself says on its product pages that some sample functions are still being developed and tested. A low price is not evidence that a robot can do a job.
What to read next
- Humanoid robot price 2026: every listed price in one table.
- Can you buy a humanoid robot?: which models have an order page.
- Profiles: Unitree G1, Unitree R1, Unitree H1 and Unitree H2.
Sources
- Unitree G1 product page
- Unitree R1 product page
- Unitree H1 product page
- Unitree H2 product page
- Unitree shop: G1, R1, H1
Checked on 18 November 2026.
Published by TheMimic. Robot profiles and deployment records are maintained separately from editorial analysis.